[. . . ] Kingston SSDNow E100 Addendum Thank you for purchasing Kingston’s SSDNow E100. [. . . ] SSD is connected to onboard SATA port as a stand-alone drive with BIOS configured for RAID Mode running Intel RST 9. 6 or higher and in a RAID 0 configuration running Intel RST 11. 5 or higher If your SSD(s) is being used in the following configurations / conditions the above warning does not apply since the TRIM command is not being passed to the SSD: 1. SSDs that are attached to SATA & SAS HBAs and RAID controller add-in cards (e. g. , PCIe) All RAID levels supported. SSDs are configured in a RAID array (RAID 1, 5, 10, etc. ) See Item #4 above. SSDs are plugged into the server internal drive bays connected to a SATA/SAS RAID controller 5. [. . . ] "0" means TRIM is disabled, "1" means TRIM is enabled on one volume, "2" means TRIM is enabled on two volumes, etc. [. . . ]